British Fires Berkshire L30G Troubleshooting Guide

British FiresBerkshireMODEL : L30GINSTALLATION AND USER INSTRUCTIONSAll instructions must be handed to user for safekeepingRevision A - 08/06Country(s

FITTING THE DECORATIVE FRAME ASSEMBLYRemove the decorative frameassembly from any protectivepackaging, and remove anyprotective film that may beprese

BRIEFING THE CUSTOMERAll instructions must be handed to the user for safekeeping. Show the customer how to light and controlthe fire. After commission

PILOT ASSEMBLYClean the pilot assembly with a soft brush and blow through. Check the aeration holes are free of any dirtor lint. Clean thoroughly in

TROUBLESHOOTING GUIDEFire sparks but pilot does not light No gas to fire, check isolators are open. Pipe work blockage, clean out. Air not fully purg

USER INSTRUCTIONSSection Content Page No1.0 Important Notes 12.0 Clearances to Combustibles 23.0 Ventilation & Room Size 24.0 Operating Instructio

CLEARANCES TO COMBUSTIBLESClearances to combustible materialsCombustible materials are defined as wood, fabrics, or other materials likely to combust

VENTILATION AND ROOM SIZE (continued)The room size should be a minimum of 30m3(e.g. 11’6” x 11’6” x 8’) to allow adequate circulation ofair and ensur

Berkshire

INSTALLATION INSTRUCTIONSPreliminary Notes Before InstallationThis appliance is a high efficiency, flueless, flame effect gas fire. It providesradian

IMPORTANT NOTESThis appliance is a catalytic flueless flame effect gas fire, providing radiant and convectedwarmth. It is designed to operate on Natu

INSTALLATION REQUIREMENTSIf the appliance is to be sited near a disused natural draught flue it is recommended that the old flueshould be partially se

SITE REQUIREMENTS (continued)Clearances to non-combustiblesNon combustible surfaces are defined as brick, metal, marble, concrete etc. and also a numb

VENTILATION (continued)Any ventilation fitted must comply with BS 5871 part 2 and BS 5440 part 2. Ventilation fitted under, orwithin immediate vicini

FIXING THE APPLIANCEAfter having selected the final mountingposition of the appliance, taking intoaccount the site requirements as speci-fied in secti

TESTING AND COMMISSIONINGTurn on and test the gas supply up to the fire for any leaks, in accordance with the current edition ofBS6891.OPERATING THE A